FENIX FN / FN_L Versatile Cultivator

FENIX-FN-FNL-mobile_1
  • Versatile use from shallow stubble cultivation to deep loosening up to 35 cm.

  • Thanks to spring-loaded auto-reset system.

  • High strength thanks to the triple-girder frame of a 100×100 mm profile.

  • Wide selection of tines, chisels (standard or Long Life chisels) and rear packers.

  • Excellent machine throughput even with high crops thanks to 80 cm frame clearance.

  • The option of hydraulically setting the working depth directly from the tractor‘s cabin.

FENIX FN/FN_L is a simple 3-row versatile cultivator suitable for smaller and medium sized farms which are looking for tools that provide options and versatility.

The Fenix FN/FN_L can be used for various working operations from shallow stubble cultivation to deep tilling.

Thanks to the variety of share and chisel types which can be affixed to the tines, you can work at various depths with various tillage intensities.

MACHINE TYPEmounted versatile 3-row cultivator
OPERATING COMPONENTS3 rows of tines (280 mm arrow-shaped shares, chisels 60/80 mm or Long Life chisels 80 mm, winged chisels), levelling discs/spring levellers, rear packer (tube, roadpacker, steel ring, V-ring, U-ring, double packer – for more see p. 60)
SECURINGshallow stubble cultivation, intense medium depth loosening, deep loosening with high quality mixing of crop residue
USAGEvertical double spring auto-reset system (FN) / horizontal single spring auto-reset system (FN_L) or shear bolt (FN_L)
WORKING OPERATIONSintensive cultivation at the chosen depth (depending on the shares or chisels used), evenly mixed plant residue, capillary disruption, surface levelling (using spring or discs), levelling, compacting, sowing intercrops (Alfa Drill)
Thanks to its variety of options, the Fenix FN/FN_L is a versatile machine for all seasons.

Thanks to its variety of options, the Fenix FN/FN_L is a versatile machine for all seasons.

3 rows of selective shares, a row of levelling springs and the optional rear packer guarantee excellent results.

3 rows of selective shares, a row of levelling springs and the optional rear packer guarantee excellent results.

You can comfortably control the working depth from the tractor cabin. Non-stop securing guarantees safe and smooth work under any circumstances.

MESSAGE MAIN ADVANTAGES OF THE MACHINE

  • Versatile machine for shallow stubble cultivation, basic preparation and cultivation.

  • Covers and mixes plant residue evenly through the soil profile after the harvest.

  • High crumbling effect via the rear packers.

  • A level finish is left behind the machine.

  • Consolidation of the worked surface ensures the germination of volunteer plants and weeds.

  • Can even be used in wet conditions without rear packers.

  • Ensure your agro-technical deadlines are met, allowing you to work in waterlogged conditions.

MACHINE PERFORMANCE

  • The loosening and mixing of the soil via tines arranged into three rows with individual spacing of 30 cm and row offset at 80 cm. This arrangement guarantees the perfect overlap of the tines and very good passability of material through the machine.

  • Levelling the surface by spring steel levellers or levelling rotary discs in front of the rear packer.

  • Re-consolidation and depth control via packer rollers (select the packers to match the soil conditions).

FENIX FN/FN_L

WORKING PARTS FOR VARIOUS WORK OPERATIONS

CLIP-ON SHARES

Shares of 280 mm in width are convenient tools for shallow stubble and for undercutting of the soil profile across a full working width and mixing it with the crop residue. This activates the second growth and weed for their subsequent elimination.

RADLIČKY CLIP-ON
MULCH DLÁTA S KŘÍDLY

MULCH CHISELS WITH WINGS

The chisel (40 or 80 mm) can be fitted with wings (125 or 185 mm – Long Life) for perfect cultivation of the soil down to medium depths, followed by the even mixing of crop residue. The wings improve this mixing effect and ensure the undercutting of the soil across the full machine width.

MULCH CHISELS WITH MOULDBOAR

Suitable for the deep intense cultivation of the full profile meaning a prompt and cheap restoration of the soil stucture. The combination of chisels (40 or 80 mm) and the mouldboard induces a high mixing effect at low machine resistance to the soil.

MULCH DLÁTA S ODHRNOVAČKOU
DLÁTA LONG LIFE

LONG LIFE CHISELS

Reinforced Long Life chisels with an extended service life are fitted with carbide plates and improved protection at the bottom part and around bolts. The service life of these chisels spans several times more compared to the conventional ones, this is suitable mainly for abrasive soils. The time normally spent on chisel replacement may be used more effectively. Long Life for your comfort and lower total cost.

Size: 40 and 80 mm

CORRECT SOIL CONSOLIDATION

Correct use of packers 
The work performed by the machines packer effects the final work of the machine. The selection of a suitable packer is of vital importance. It is also necessary to realise the correct time for the packers application. Where as, the soil should rather be compacted during the summer season to initiate a more controlled

second growth and the sealing of the soil to prevent vaporization, the works during the winter season should be done without compaction and with some ridges left behind to catch the snowfall. The moisture from precipitation is then used for the improved germination of spring crops. The Fenix cultivator allows you to work with or without packers before the winter.

FENIX FN/FN_L
FENIX FN / FN_LFN 3000L / 3000FN 3500L / 3500FN 4000 L / 4000
WORKING WIDTHm3 3.5

4

TRANSPORT WIDTHm

3

3

3

TRANSPORT LENGTHm3,58/3,88*** / 3,883,58/3,88*** / 3,88 3,92
WORKING DEPTH*cm 5 – 35 5 – 35 5 – 35
NUMBER OF TINESpcs101213
SPACING OF TINEScm303030
RECOMMENDED OUTPUT*HP 150 – 225 160 – 240 170 – 255
TOTAL WEIGHT**kg 1350 – 2700 1550 – 3050 2300 – 3800

* depends on soil conditions ** depends on the machine accessories

FENIX FN FN_L

PACKERS

Tube Packer

TUBE PACKER

A traditional packer with stainless steel rods that have a classic crumbling effect.
• weight: 110 kg/m
• diameter: 635 mm

U-Ring Packer

U-RING PACKER

A steel packer for all soil types with high quality break-up and low stickiness due to the „U“ rim profile.
• weight: 155 kg/m
• diameter: 600 mm

Double Packer

DOUBLE PACKER

Ideal for high-quality two-step processing of medium and light soils in drier conditions.
• weight: 238 kg/m
• diameter: 370/470 mm

V-ring pěch

V-RING PACKER

Heavy duty steel packer for all types of soils. Intensive crumbling and firming of the soil.
• weight: 176 kg/m (incl. Scrapers)
• diameter: 630 mm

Steel Ring Packer

STEEL RING PACKER

Packer with stainless steel components for superior compaction, suitable for all soil types.
• weight: 177 kg/m
• diameter: 525 mm

Road Packer

ROAD PACKER

A packer from hard natural rubber suitable for all soil conditions with verylow tack.
• weight: 217 kg/m (including the scraper system)
• diameter: 590 mm

HITCH

3-Point Linkage

3-POINT LINKAGE

BASE

Shear Bolt – Securing of Working Tines [Fenix FN_L]
Vertical AUTO-RESET system [Fenix FN]

VERTICAL AUTO-RESET SYSTEM (FENIX FN)

Fenix FN only
• Vertical AUTO-RESET system
• 2 safety springs

SPRING LEVELLERS

OPTIONAL

Horizontální NON-STOP systém [Fenix FN_L]

HORIZONTAL AUTO-RESET SYSTEM (FENIX FN_L)

Fenix FN_L only
• Horizontal AUTO-RESET system
• safety spring

Points with TWIST effect – LONG LIFE

POINTS WITH TWIST EFFECT – LONG LIFE

LONG LIFE (karbid)

Wings

WINGS

• 125 mm
• 185 mm
• 185 mm LONG LIFE (carbide)

Tine Harrow

TINE HARROW

Fertilizer Set

FERTILIZER SET

Flow Dividers and Connecting Hoses

Levelling Discs Secured by Rubber Segments

LEVELLING DISCS SECURED BY RUBBER SEGMENTS

HYDRAULIC DEPTH ADJUSTMENT

GALLERY / MEDIA

Contact form

Do you need help with your selection, are you interested in a machine demonstration? Contact us!

2 + 3 = ?

News

Looking for

My BEDNAR machine

Download

About us