ATLAS AM

The ATLAS AM is a trailed wide disc cultivator of short conception designed for high daily performance whilst reducing cost due to its wide working width and fast operating speeds.

The general robustness of the machine and the aggressive positioning of serrated discs in relation to the soil allows a greater working depth of up to 16 cm mixing a larger amount of crop residue.

to the axle being positioned in front of the disc section operating width thanks to the equal pressure which is of gravity. sections for the ideally positioned centre The axle is located in front of the working applied to the discs, even at the edge of the cultivator due The exact working depth is maintained over the whole Rear packers Auto-reset system of discs 2 rows of 620 mm discs Support wheels
Concept Atlas AM
Machine type: trailed disc cultivator of short conception
Operating components: 2 rows of discs 620×6 mm (serrated discs or aggressive A-discs), rear packer (tube, steel ring, roadpacker, V-ring, U-ring,
double U-ring, double packer, cutpack – for more see p. 60)
Securing: spring auto-reset system
Usage: deep, swift stubble cultivation with the incorporation of large number of post-harvest residue
Working operations: loosening of the surface layer, cutting crop residue, uniform mixing of crop residue, disruption of capillarity, settlement and compaction

 

Enormous daily output of the Atlas AM 12000 in 12 hours and the working speed of 15 km/h reaching up to 135 ha. Atlas AM 10000 up to 112 ha.

Precise stubble cultivation over a wide scope in all kinds of soil thanks to machine weight and agressive positioning of the discs.

The transport machine position. Transport width of 3 m thanks to Bar-Lock folding system.


Agronomic advantages of the machine

  1. "The disc cultivator is designed for various kinds of stubbles and loosening to a depth of 16 cm."
  2. "Work without clogging even in situations with high amounts of post harvest residue including corn."
  3. "The versatility of the machine which can be used for soil preparation prior to seeding, sowing the intercrop and mixing liquid manure with the soil."
  1. "The possibility to work in drought like conditions thanks to the aggressive positioning of the discs to the soil. A spacing of 25 cm between the discs enables you to work in very humid conditions as well."
  2. "The fine crumblling effect created by the high speed of the machine and fast circumferential speeds of the tightening rollers leaves you with a flat and clot free field."
  3. "The use of the machine in conventional husbandry systems (after ploughing), and in minimisation systems."
Atlas

Savings benefits

  1. quality cultivation in a single pass " = quality cutting and the incorporation of huge amounts of crop residue in a single pass as opposed to many passes"
  2. high working speeds " = the work is done faster making it easy to keep to the agrotechnical deadlines and deliver better preparation for sowing machines"
  1. the ability to work in difficult conditions " = the technical design of the machine enables you to work in extreme conditions caused by factors such as high moisture or drought"
  2. a lesser amount of passes = helps to eliminate soil compaction and thus facilitates the principles of sustainable agricultural development
 
Portrait "Even a high density of crop residue does not result in the clogging of the machine. The machine properly turns the crop residue over to the bottom and the soil is undercut at the same depth through the shallow stubble. These are the reasons that we decided to get the disc cultivator Atlas AM."

Miroslav Štipčák | mechanic "ZS Rolnicka a.s | Hroznova Lhota Hodonin district" 2250 ha | Atlas AM 12000

Atlas

You can use the ATLAS

In conventional ploughing systems "– when used for traditional ploughing it is recommended to disc the lots at least once before using the plough. Capillarity will be interrupted – humidity leakage from the soil is prevented and at the same time the crop residue cut and partially incorporated." The decay process of crop residue is faster and more effective.

In minimisation systems "– working with crop residue is essential for soil cultivation in minimisation systems. The structure of the Atlas consisting of discs measuring 620×6 mm with an aggressive cutting and plough angle guarantee perfect incorporation. The quality cutting and mixing of crop residue and soil creates a homogenous material. Working with crop residue has been made easier and cheaper."

demonstration on grain stubble field

Ukázka práce po obilovině
cultivation depth: 12 cm
number of passes: 1
working speed: 12–14 km/h
fuel consumption: 8 l/ha

Demonstration on rape stubble field

Ukázka práce po řepce
cultivation depth: 12 cm
number of passes: 1
working speed: 12–14 km/h
fuel consumption: 8 l/ha

Demonstration on corn stubble field

Ukázka práce po kukuřici na zrno
cultivation depth: 15 cm
number of passes: 2
working speed: 10–12 km/h
fuel consumption: 10–12 l/ha

Quality work in all conditions

"Two rows of aggressively positioned discs open the soil and ensure intensive high quality mixing of crop residue and soil. The Atlas is also capable of mixing high amounts of crop residue with soil or livestock manure thanks to the weight of machine and placing the discs at an angle of 17º."

"The most suitable to penetrate the soil with maximum turning and mixing of soil with surface material irrespective of humidity. In extremely dry conditions the discs easily penetrate the soil as well due to the position of the discs and the overall weight of machine. The Atlas is a versatile tool for your business."

Atlas

VARIABLE AGGREGATION WITH A TRACTOR

"The new versatile drawbar enables you to exchange its front part in just a few simple steps, so you can easily aggregate the machine with different types of hitch (standard pin, ball pin K-80, towing eye 35, 40 or 51 mm)."

"2 ROWS OF DISCS " AT A PLOUGHING ANGLE

"Each of the discs operates under the so-called ploughing " "angle (an aggressive positioning against the soil). This" " This positioning of the discs facilitates the penetration" "of the soil and increases the incorporation of " cultivated material.

SPRING AUTO-RESET SYSTEM OF TINES

Auto-reset system is formed by a horizontal pre-stressed spring for 200 kg. "Pre-stressed springs apply the ideal amount of pressure" "to the soil. Deviated tines together with" "the auto-reset system ensure the accurate" "guidance of each disc."

A-DISCS

"The machine can be equipped with A-discs" "(aggressive discs, diameter of 620×6 mm)," "which increases the cutting ability multi-fold" "and creates (bring up) more soil for mixing" "it with the residue in comparison" to traditional notched discs.

REAR ROLLER

"Finalizes the entire work process. There are 9 various types of rollers on offer for different soils and climate conditions, making it easy to customise the machine to your needs."

Atlas

Rugged structure

"Using quality material and over-dimensioning makes exposed places the domain of the Atlas. The increased torque inflexibility of the main frames extends the long service life of key parts of the machine. The actual heart of the machine is formed by tines with a disc with switching force in a vertical direction of 200 kg up to a maximum of 320 kg."

"Slowly increasing the force to the deviation of the disc lowers the load and lessens the wear of the bearing houses, screw connections, pins and the actual frames of the machine. These technical characteristics significantly prolong the service life of the working units, the main and in particular side frames of the machine."

Working Tools

Notched Discs

Notched Discs

Notched Discs
• 620 × 6 mm

A-Discs (AGGRESSIVE)

A-Discs (AGGRESSIVE)

A-Discs (AGGRESSIVE)
• 620 × 6 mm

Packers

Tube Packer

Tube Packer

A traditional packer with stainless steel rods that have a classic crumbling effect.
Weight: 110 kg/m
Diameter: 635 mm

U-Ring Packer

U-Ring Packer

A steel packer for all soil types with high quality break-up and low stickiness due to the „U“ rim profile.
Weight: 155 kg/m 
Diameter: 600 mm

Double Packer

Double Packer

Ideal for high-quality two-step processing of medium and light soils in drier conditions.
Weight: 238 kg/m
Diameter: 370/470 mm

V-ring Packer

V-ring Packer

Heavy duty steel packer for all types of soils. Intensive crumbling and firming of the soil.
Weight: 176 kg/m (incl. Scrapers)
Diameter: 630 mm

Steel Ring Packer

Steel Ring Packer

Packer with stainless steel components for superior compaction, suitable for all soil types.
Weight: 177 kg/m
Diameter: 525 mm

Double U-Ring Packer

Double U-Ring Packer

A double row steel packer with auto-cleaning effect, excellent break-up and low stickiness due to the „U“ rim profile.
Weight: 163 kg/m
Diameter: 600 mm

Cutpack

Cutpack

Heavy steel packer with powerful cutting capabilities suitable for heavy soils.
weight: 235 kg/m
diameter: 630 mm

Road Packer

Road Packer

A packer from hard natural rubber suitable for all soil conditions with verylow tack.
• Weight: 217 kg/m (including the scraper system)
• Diameter: 590 mm

Hitch

Towing Eye

Towing Eye

51 mm • 55 mm • 62 mm • 71 mm • 73 mm

ATLAS AM AM 10000 AM 12000
Working width m 10 12
Transport width m 3 3
Transport length m 11.7 12.7
Working depth* cm 6 - 16 6 - 16
Number of Discs pcs 80 96
Recommended output* HP 380 - 450 480 - 550
Total Weight** kg 14800 - 15600 15200 - 16600

* depends on soil conditions
** depends on the machine accessories

Video

ATLAS AM
ATLAS AM
ATLAS AM

Photos

Leaflet

Scraper V-ring roller

Scraper V-ring roller

AO, AM

  • 1 - 00037392 SCRAPER 1
  • 2 - KM000395 SCREW 1
  • 3 - KM000081 WASHER 1
  • 4 - KM000155 NUT 1
  • 5 - 00000754 HOLDER 1
Scraper Steel ring packer

Scraper Steel ring packer

AO, AM

  • 1 - 00029738 SCRAPER 1
  • 2 - KM000395 SCREW 1
  • 3 - KM000081 WASHER 1
  • 4 - KM000155 NUT 1
  • 5 - 00046596 HOLDER 1
A-disc 620 × 6 mm

A-disc 620 × 6 mm

AO, AM

  • 1 - KM060240 DISC 1
  • 2 - KM000372 SCREW 6
  • 3 - KM000056 WASHER 12
  • 4 - KM000325 NUT 6
Serrated disc 620 × 6 mm

Serrated disc 620 × 6 mm

AO, AM

  • 1 - KM060297 DISC 1
  • 2 - KM000372 SCREW 6
  • 3 - KM000056 WASHER 12
  • 4 - KM000325 NUT 6
Scraper – Cutpack roller

Scraper – Cutpack roller

AM

  • 1 - 00456130 SCRAPER 1
  • 2 - KM000395 SCREW 1
  • 3 - KM000081 WASHER 1
  • 4 - KM000155 NUT 1
  • 5 - 00046816 HOLDER 1