FENIX FN / FN_L Universaalkultivaatorid

FENIX-FN-FNL-mobile_1
  • Mitmekülgselt kasutatav, alates tüüpõllu pindmisest harimisest kuni sügava kobestamiseni kuni 35 cm sügavuselt.

  • Tänu automaatsele kivikaitsesüsteemile on tagatud sujuv ja ohutu töö ka rasketes tingimustes.

  • Väga tugev tänu 100 × 100 mm profiiliga kolmekordse kandetalaga raamile.

  • Lai valik terasid, peitleid (standardsed või pika tööeaga peitlid) ja tagapakkereid.

  • Tänu raami 80 cm kliirensile on masina tööjõudlus ka kõrge vilja puhul suurepärane.

  • Võimalus muuta töösügavust hüdrauliliselt otse traktori kabiinist.

FENIX FN/FN_L on lihtne kolmerealine universaalne kultivaator, mis sobib väiksematele ja keskmise suurusega ettevõtetele, mis otsivad erinevaid võimalusi ja universaalsust pakkuvaid tööriistu.

Seadet Fenix FN/FN_L saab kasutada erinevateks töödeks alates tüüpõllu pindmisest harimisest kuni sügavkobestuseni.

Tänu erinevatele piide külge kinnitavatele tera- ja peitlitüüpidele saate töötada erinevates sügavustes erineva kobestusintensiivsusega..

SINA TÜÜPrippühendusega mitmeotstarbeline kolmerealine kultivaator
TÖÖSEADMEDKolm rida piisid (280 mm laiused lõiketerad, 60/80 mm peitlid või 80 mm Long Life’i peitlid, vintjad hõlmad), tasanduskettad/tasanduspiid, roadpacker, tagumine pakker (rehvpakker).
KIVIKAITSEtüüpõllu pindmine harimine, intensiivne kobestamine keskmisel sügavusel, sügavkobestus koos kvaliteetse taimejäänuste pinnasesse segamisega
KASUTUSALAvertikaalne topeltvedruga automaatne kivikaitsesüsteem (FN) / horisontaalne üksikvedruga automaatne kivikaitsesüsteem (FN_L) või lõikepolt
TÖÖOPERATSIOONIDIntensiivne mullaharimine valitud sügavuses (olenevalt kasutatavatest teradest ja peitlitest), ühtlaselt pinnasesse segatud taimejäägid, kapillaaride purustamine, pealispinna tasandamine (kasutades piisid või kettaid), tasandamine, pakkimine, tihendamine, vahekultuuride külvamine (Alfa Drill)
Tänu suurele lisavarustuste valikule on Fenix FN/FN_L mitmekülgne masin, mis on mõeldud kasutamiseks kõigil aastaaegadel.

Tänu suurele lisavarustuste valikule on Fenix FN/FN_L mitmekülgne masin, mis on mõeldud kasutamiseks kõigil aastaaegadel.

Kolm rida valikulisi terasid, tasanduspiide rida ja valikuline tagumine pakker garanteerivad ideaalse tulemuse.

Kolm rida valikulisi terasid, tasanduspiide rida ja valikuline tagumine pakker garanteerivad ideaalse tulemuse.

You can comfortably control the working depth from the tractor cabin. Non-stop securing guarantees safe and smooth work under any circumstances.

MAIN ADVANTAGES OF THE MACHINE

  • Versatile machine for shallow stubble cultivation, basic preparation and cultivation.

  • Covers and mixes plant residue evenly through the soil profile after the harvest.

  • High crumbling effect via the rear packers.

  • A level finish is left behind the machine.

  • Consolidation of the worked surface ensures the germination of volunteer plants and weeds.

  • Can even be used in wet conditions without rear packers.

  • Ensure your agro-technical deadlines are met, allowing you to work in waterlogged conditions.

MACHINE PERFORMANCE

  • The loosening and mixing of the soil via tines arranged into three rows with individual spacing of 30 cm and row offset at 80 cm. This arrangement guarantees the perfect overlap of the tines and very good passability of material through the machine.

  • Levelling the surface by spring steel levellers or levelling rotary discs in front of the rear packer.

  • Re-consolidation and depth control via packer rollers (select the packers to match the soil conditions).

FENIX FN/FN_L

WORKING PARTS FOR VARIOUS WORK OPERATIONS

CLIP-ON SHARES

Shares of 280 mm in width are convenient tools for shallow stubble and for undercutting of the soil profile across a full working width and mixing it with the crop residue. This activates the second growth and weed for their subsequent elimination.

RADLIČKY CLIP-ON
MULCH DLÁTA S KŘÍDLY

MULCH CHISELS WITH WINGS

The chisel (40 or 80 mm) can be fitted with wings (125 or 185 mm – Long Life) for perfect cultivation of the soil down to medium depths, followed by the even mixing of crop residue. The wings improve this mixing effect and ensure the undercutting of the soil across the full machine width.

MULCH CHISELS WITH MOULDBOAR

Suitable for the deep intense cultivation of the full profile meaning a prompt and cheap restoration of the soil stucture. The combination of chisels (40 or 80 mm) and the mouldboard induces a high mixing effect at low machine resistance to the soil.

MULCH DLÁTA S ODHRNOVAČKOU
DLÁTA LONG LIFE

LONG LIFE CHISELS

Reinforced Long Life chisels with an extended service life are fitted with carbide plates and improved protection at the bottom part and around bolts. The service life of these chisels spans several times more compared to the conventional ones, this is suitable mainly for abrasive soils. The time normally spent on chisel replacement may be used more effectively. Long Life for your comfort and lower total cost.

Size: 40 and 80 mm

CORRECT SOIL CONSOLIDATION

Correct use of packers 
The work performed by the machines packer effects the final work of the machine. The selection of a suitable packer is of vital importance. It is also necessary to realise the correct time for the packers application. Where as, the soil should rather be compacted during the summer season to initiate a more controlled

second growth and the sealing of the soil to prevent vaporization, the works during the winter season should be done without compaction and with some ridges left behind to catch the snowfall. The moisture from precipitation is then used for the improved germination of spring crops. The Fenix cultivator allows you to work with or without packers before the winter.

FENIX FN/FN_L
FENIX FN / FN_LFN 3000L / 3000FN 3500L / 3500FN 4000 L / 4000
TÖÖLAIUSm3 3.54
TRANSPORDILAIUSm333
TRANSPORDIPIKKUSm3,58/3,88*** / 3,883,58/3,88*** / 3,88 3,92
TÖÖSÜGAVUS*cm 5 – 35 5 – 35 5 – 35
PIIDE ARVtk101213
PIIDE VAHEKAUGUScm303030
SOOVITUSLIK VÕIMSUS*hj 150 – 225 160 – 240 170 – 255
MASS**kg 1350 – 2700 1550 – 3050 2300 – 3800

* vastavalt töö eesmärgile ** sõltub masina lisavarustuses

FENIX FN FN_L

PAKKERID

Toru pakker

TORU PAKKER

A traditional packer with stainless steel rods that have a classic crumbling effect.
• weight: 110 kg/m
• diameter: 635 mm

U-rõngastega pakker

U-RÕNGASTEGA PAKKER

A steel packer for all soil types with high quality break-up and low stickiness due to the „U“ rim profile.
• weight: 155 kg/m
• diameter: 600 mm

Topeltpakker

TOPELTPAKKER

Ideal for high-quality two-step processing of medium and light soils in drier conditions.
• weight: 238 kg/m
• diameter: 370/470 mm

V-ring pěch

V-RÕNGASTEGA PAKKER

Heavy duty steel packer for all types of soils. Intensive crumbling and firming of the soil.
• weight: 176 kg/m (incl. Scrapers)
• diameter: 630 mm

Terasrõngastega pakker

TERASRÕNGASTEGA PAKKER

Packer with stainless steel components for superior compaction, suitable for all soil types.
• weight: 177 kg/m
• diameter: 525 mm

Roadpacker

ROADPACKER

A packer from hard natural rubber suitable for all soil conditions with verylow tack.
• weight: 217 kg/m (including the scraper system)
• diameter: 590 mm

HAAKEKONKSUD

3-punktiline haakimine

3-PUNKTILINE HAAKIMINE

PÕHIVARUSTUS

Kaitsepolt - vannase kaise [Fenix FN_L]

KAITSEPOLT – VANNASE KAISE (FENIX FN_L)

Fenix FN_L

Vertikaalne AUTO-RESET süsteem [Fenix FN]

VERTIKAALNE AUTO-RESET SÜSTEEM (FENIX FN)

Fenix FN only
• Vertical AUTO-RESET system
• 2 safety springs

VEDRUTASANDID

LISAVARUSTUS

Horizontální NON-STOP systém [Fenix FN_L]

HORISONTAALNE AUTO-RESET SÜSTEEM (FENIX FN_L)

Fenix FN_L only
• Horizontal AUTO-RESET system
• safety spring

TWIST efektiga peitlid - LONG LIFE

TWIST EFEKTIGA PEITLID – LONG LIFE

LONG LIFE (carbide)

Tiivad

TIIVAD

• 125 mm
• 185 mm
• 185 mm LONG LIFE (carbide)

Varbäke

VARBÄKE

Väetisekomplekt

VÄETISEKOMPLEKT

Flow Dividers and Connecting Hoses

Tasandusketastel on kummielementidega kaitse

TASANDUSKETASTEL ON KUMMIELEMENTIDEGA KAITSE

HÜDRAULILINE SÜGAVUSE MUUTMINE

FOTOD / MEDIA

Contact form

Do you need help with your selection, are you interested in a machine demonstration? Contact us!

0 + 2 = ?

Uudised

Otsing

Minu Bednar

Allalaadimine

Bednarist